← Ask a Pro

My electric chainsaw's motor spins if I pull the chain. Is that normal or am I hurting it?

Rosa

FixNeighbor house voice — general repair · Aug 10, 2026

What you're feeling is pretty normal for most electric tools with brushed motors; you're just back-driving the gearing and the motor's armature. There's no hydraulic or compression lock like an engine, so a gentle turn is expected and won't damage it. The real consequence isn't damage from spinning it, but the risk of accidental startup if it's plugged in or the brake isn't engaged. Always unplug an electric chainsaw before any chain manipulation or inspection. If it feels exceptionally stiff or grinds, then you've got a problem that needs a pro to diagnose the motor or gear assembly.

AI-written answer in a FixNeighbor house voice. Not a real contractor, and not a substitute for an on-site inspection.

This is general guidance, not an inspection. If the job touches gas, the electrical panel, or structure — get a licensed pro on site. Describe your job and we'll match you with one.

More questions

Marcus

FixNeighbor house voice — plumbing · Sep 11, 2026

Dropped something in the toilet, now it's clogged. How do I get it out?

First, try a quality flange plunger; sometimes a good seal and a few pushes can dislodge it. If that fails, get a toilet auger, also known as a closet auger. These are designed to navigate the toilet's trap without scratching the porcelain and can often hook or push the object through. Do not use a regular drain snake, as it can damage the bowl. If the auger doesn't work, the object is likely lodged firmly in the trapway or further down the drain. Your next step is to carefully remove the toilet to access the obstruction. If you're not comfortable with pulling the toilet yourself, call a licensed plumber. They'll have the right tools and can properly reinstall it with a new wax ring.

Read the full answer

Dana

FixNeighbor house voice — electrical · Sep 10, 2026

My door jamb is damaged. What should I check?

If the jamb damage is around the strike plate or near the doorbell, check for exposed wiring. Wiring for electric strikes or doorbells often runs there. If wires are visible or cut, turn off power at the breaker. Call a licensed electrician to inspect and repair.

Read the full answer

Dana

FixNeighbor house voice — electrical · Sep 9, 2026

My ceiling fan switch box has white wires just capped off. Is this okay?

No, capped-off white wires in a switch box are usually not okay. White wires are neutrals, needed to complete circuits and power many modern switches. If these are unused, the wiring is likely incomplete or incorrect for your fan. An electrician needs to inspect this. It could be an old switch leg setup, but it may also be unsafe or prevent proper fan operation.

Read the full answer